Published at Friday, August 31st, 2018 - 22:00:14 PM. . By Aurelia Beaty.
This is why you want to make sure that you have a diagram that you can use, but where do you get them from? There are a number of sites online that offer you schematics for making up these types of cables, as said before it is not that hard, but you will want to make sure that you follow the instructions perfectly if you are doing to have a fast connection to use in your home or office. You will find that the cables have a very distinct color code to it. There are many different colors used in Ethernet wiring, but most of the time the common colors are used all over the world. If you are going to find the right setting for this type of thing you will want to make sure that you spend a little time online.
Once the body is finished, drill holes (if needed) and assemble the body with electronics and hardware. I find after years of soldering iron burns and melted wires, as well as a trip or two to the hospital from solder fumes, that the same well vented area is needed as well as pre-assembling of the pots to the control plate be done outside and separate from the bass body itself. You want everything to be finish and connected that way the only thing left to solder will be the ground cord and pickup wires. I would also recommend buying a Jazz Bass electronic kit.
Any content, trademark’s, or other material that might be found on the Pajama Music website that is not Pajama Music’s property remains the copyright of its respective owner/s. In no way does Pajama Music claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Pajama Music. All Rights Reserved.