By Emely Greenfield. Electric Bass Guitar. Published at Friday, August 31st, 2018 - 21:26:08 PM.
Once I chose a color I coated the body with MinWax Pre-Stain. This water-based compound fills in the pours of uneven hard woods and allows for a more uniform and even stain across the whole body. Please make sure to always follow the directions on the can for best results! After drying I started to stain the body. Again, I can not stress how important it is to work in a safe and well ventilated area. While it maybe temping to do this in a more comfortable area, you don't want to expose yourself to fumes and suffer the side effects! I hung and finished the body in my apartment patio closet which was perfect for shelter and ventilation. Remember, if you find a coat is unacceptable you can always sand it away with a low grit sandpaper. However, it will require the same low to high sanding process, and if your not careful it the sanding can erode angles and curves.
Intonation of a lined fingerboard is done in the same way as a fretted. Hook up your tuner to your bass and play the open G string in tune. Fret directly on the 12th and check to see if your fretted note is in tune. Carefully make sure that you are using the tip of your finger avoiding any kind of fingertip pivot that will change your pitch. While this is a great technique while playing, in tuning and setup its not going to do you any favors. Now if the fretted note is sharp, turn the adjustment screw on the bridge so the saddle is moving towards you. If it is flat move the saddle away from you. Do small quarter turns and bring the string back up to tune before you check it. Once the fretted note is intonated repeat the process with the other three. One thing to keep in mind is that while the fret lines are right where the frets should be, it doesn't mean that all of the lines are in tune 100% all over the neck.
However, a good wiring diagram will make it possible for you to successfully and safely tackle wiring 4-Way Switches. As important as electrical wiring diagrams are to the successful completion of your wiring project, safety and respect for electricity are essential. Never work on live circuits. Before you begin your project, identify the circuit youre working on and then turn off power to that circuit at the main panel. Then confirm that the power is off with a voltage tester. If at any time you feel unsure about what youre doing, please call a licensed electrical contractor. One of the most difficult automotive repair tasks that a mechanic or repair shop can undertake is the wiring, or rewiring of a cars electrical system. The problem essentially is that every car is different.
original fender bass guitar wirirng diagrams plete listing of all original fender bass guitar wiring diagrams in pdf format to view or a fender diagram click the link to the right. bass guitar service diagrams – fender bass guitar service diagrams most of our older guitar parts lists wiring diagrams and switching control function diagrams fender bass guitar owner.
Any content, trademark’s, or other material that might be found on the Pajama Music website that is not Pajama Music’s property remains the copyright of its respective owner/s. In no way does Pajama Music claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Pajama Music. All Rights Reserved.