By Aurelia Beaty. Electric Bass Guitar. Published at Friday, August 31st, 2018 - 04:28:31 AM.
When you start off with your electrical motors you will have to choose a diagram that is the easiest. This will probably be a small motor for a simple machine. You can practice on this one and then move onto the bigger and more complicated ones when you are confident that you can build a solid motor. There are lots of places on the internet where you can get an AC electric motor diagram and all you have to do to find it is type what you want into the search engine. You can then choose from the list that comes up which ones you want. You might also find a website where you can gain access to a huge number of schematics for various motors and applications.
We will start with the body. In this tutorial we will be using a simple two piece Alder body, but like I said earlier, your tastes and budget can be the judge on what tone woods or combination you would like. The first step is to sand your new body with a 60 to 150 grit sand paper. This ensures a smooth feel, even grain and uniform look on the wood. Remember to always sand with the grain of the wood and not to push down too hard.
So you can very well calculate the total cost of procurement for the cable provided you measure out the routing distance in feet between your computer Ethernet port and the device to which you want to connect it to. Next item on your buying list are the two RJ-45 connectors unless you already have them with you. You also need to have a crimping device and a network cable connection tester. The wiring diagram you can easily download using the Internet. Two such diagrams are available. One uses the TIAEIA-568-A wiring standard and the other the TIAEIA-568-B wiring standard. Incidentally TIA stands for Telecommunications Industries Association and EIA stands for Electronic Industries Association.
Frankly I can't think of an easier and more enjoyable project than building a fretless bass, and trust me when I tell you, it's easier than you think! With a little patience and attention to detail you can have a top of the line instrument for half the shelf price! If there is one thing I have learned over the years about building my own fretless basses is that once you take the responsibility of making your own axe, you become a master of your own sound. If your bass sounds and plays well or sounds and plays crappy it will be because you took the time to put the parts together and experiment! The best preliminary step to building is to go to one or more local music stores and just play basses. Make note of what you like and what you don't like about the sound, appearance and configuration of the basses, that way when you are ready to drop some cash on your parts you will know what to get. Another thing to keep in mind is that if you use crappy parts you will get a crappy sound. Always get the best grade woods and hardware you can afford, trust me it makes a HUGE difference!
Any content, trademark’s, or other material that might be found on the Pajama Music website that is not Pajama Music’s property remains the copyright of its respective owner/s. In no way does Pajama Music claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Pajama Music. All Rights Reserved.