Published at Friday, August 31st, 2018 - 20:06:30 PM. . By Clarissa Nadeau.
Once the body is finished, drill holes (if needed) and assemble the body with electronics and hardware. I find after years of soldering iron burns and melted wires, as well as a trip or two to the hospital from solder fumes, that the same well vented area is needed as well as pre-assembling of the pots to the control plate be done outside and separate from the bass body itself. You want everything to be finish and connected that way the only thing left to solder will be the ground cord and pickup wires. I would also recommend buying a Jazz Bass electronic kit.
When you start off with your electrical motors you will have to choose a diagram that is the easiest. This will probably be a small motor for a simple machine. You can practice on this one and then move onto the bigger and more complicated ones when you are confident that you can build a solid motor. There are lots of places on the internet where you can get an AC electric motor diagram and all you have to do to find it is type what you want into the search engine. You can then choose from the list that comes up which ones you want. You might also find a website where you can gain access to a huge number of schematics for various motors and applications.
Any content, trademark’s, or other material that might be found on the Pajama Music website that is not Pajama Music’s property remains the copyright of its respective owner/s. In no way does Pajama Music claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Pajama Music. All Rights Reserved.