Published at Friday, August 31st, 2018 - 22:19:33 PM. . By Phoenix Girard.
Below is a diagram showing how a standard P-Bass split coil pickup is wired as hum-canceling pickup. The pickups are wired in series. (For another example as having them wired in parallel, check out pickup_parallel_wiring. Notice that the split coils are actually out of phase here. It does not matter in this case that the coils are out-of-phase, since there are no other pickups here. If the coils are wired in-phase, then it becomes a single coil type of wiring, and you can expect to hear hum when your are near electrical fields. If you wish to add a J-Bass pickup in the bridge position, you will likely need to wire the P-Bass as a single coil, unless you thought ahead to by a split coil Jazz Bass pickup, as mentioned earlier.
So you can very well calculate the total cost of procurement for the cable provided you measure out the routing distance in feet between your computer Ethernet port and the device to which you want to connect it to. Next item on your buying list are the two RJ-45 connectors unless you already have them with you. You also need to have a crimping device and a network cable connection tester. The wiring diagram you can easily download using the Internet. Two such diagrams are available. One uses the TIAEIA-568-A wiring standard and the other the TIAEIA-568-B wiring standard. Incidentally TIA stands for Telecommunications Industries Association and EIA stands for Electronic Industries Association.
Any content, trademark’s, or other material that might be found on the Pajama Music website that is not Pajama Music’s property remains the copyright of its respective owner/s. In no way does Pajama Music claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Pajama Music. All Rights Reserved.