Published at Friday, August 31st, 2018 - 20:35:52 PM. . By Mckenna Power.
Another cheap and easy mod is to shield the control cavity. This helps eliminate noise and interference and is especially useful for dampening the inherent 60 cycle hum of single coils. There are a few ways to do this, such as copper shielding tape or conductive shielding paint. While not necessarily a tone upgrade, the shielding will eliminate a lot of noise if done properly, but is necessary for a single-coil equipped guitar used in conjunction with a lot of overdrive or distortion in the studio.
The second common OEM tube out there is the Chinese Shuguang 12AX7 (Groove Tubes also sells this tube as the 12AX7C; Tube Amp Doctor has also sold this tube as a TAD 7025; and it has also been sold by Mesa Boogie). The Chinese 12ax7's are constructed with short, fat plates, like the Sovteks, but they have an extra spacer above the tubes, a big nickel colored brace connecting the plates, and a "halo" getter on top. Again, if you see a tube made like this, it's a Chinese tube, regardless of whether it has Groove Tubes or Mesa Boogie or TAD written on the glass. These tubes have a warmer tone than the Sovteks and more gain (volume). As a result, they work well in high gain amps.
Any content, trademark’s, or other material that might be found on the Pajama Music website that is not Pajama Music’s property remains the copyright of its respective owner/s. In no way does Pajama Music claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Pajama Music. All Rights Reserved.