Published at Friday, August 31st, 2018 - 23:46:56 PM. . By Zendaya Foust.
Pickup wiring is one of those items that is worth knowing, especially if your bass has two pickups or split type pickups. Most pickups are wired in parallel configuration to the output jack. See the diagram below for two Jazz Bass pickups wired in parallel. This is normal configuration for Jazz bass and two pickup basses, like the G&L 2500.
Once you have your string cut to the right length, take the freshly cut string end and bend just a bit of it, say a centimeter or two, at a right angle. Take this straight end and insert it into the hole in the middle of the tuning peg. Use downward pressure on the string and turn it clockwise to wrap the string around the tuning peg. You want to make sure that the string is running straight front the bridge, under the string round and to the tuning peg.
Any content, trademark’s, or other material that might be found on the Pajama Music website that is not Pajama Music’s property remains the copyright of its respective owner/s. In no way does Pajama Music claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Pajama Music. All Rights Reserved.