Published at Friday, August 31st, 2018 - 20:52:04 PM. . By Zendaya Foust.
The middle position was something I really had to consider. It was going to be used only with the neck or bridge pickup, and never by itself. I chose a true single coil, the Seymour Duncan Five-Two. This uses Alnico II magnets for the treble strings, for a warmer tone, and the brighter Alnico V magnets for the bass strings. The bridge humbucker I chose was the ‘59Custom Hybrid. It is a little more powerful than most PAF-type pickups, and comes with 4-conductor wire which means the pickup can be split. This would be important because of the switching scheme used. Please check out Orpheo’s great article about splitting humbuckers.
A solution to this hum was the development of a pickup which was created slightly differently to the normal ones. Instead of a single coil of wire wrapped round the magnets, two coils were used, but each wired to the opposite polarity, both electrically and magnetically. This meant that any electromagnetic noise that was detected by both if these coils was effectively cancelled out - like adding minus five and positive five, the answer is zero. This also had the added effect of creating a much fatter sound to the guitar too. Because these pickups were designed to cancel out the hum, they were named humbuckers, and are still extremely popular today.
Any content, trademark’s, or other material that might be found on the Pajama Music website that is not Pajama Music’s property remains the copyright of its respective owner/s. In no way does Pajama Music claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Pajama Music. All Rights Reserved.