By Phoenix Girard. Guitar Electric. Published at Friday, August 31st, 2018 - 15:36:52 PM.
Without going into too much technical detail, the Piezo differs from a traditional magnetic pickup in that the Piezo element vibrates with the string, sending an electrical signal of that vibration to a preamp within the guitar for processing, rather than capturing an electromagnetic representation of that vibration which can then be sent directly to an amplifier, or to an onboard preamp if further shaping of the signal is desired. The Piezo eliminates the need for steel strings, which would otherwise interact with the magnetic pickup, and also produces more satisfactory results for players with a lighter fingerstyle technique. Lest you think this is just another passing fancy, Parker has produced a nylon string version of their famous "Fly" model and another up-and-comer, Sadowski Guitars, is producing a Telecaster style model employing the same technology.
Once the harness was removed I grabbed roll of masking tape and taped the floss to the guitar body at the holes. This was to ensure that the ends of the floss would not go into the guitar, making it even more difficult to get the wiring assembly back into the guitar. Then I fired up my soldering iron and fixed the broken connection. While I was at it I thought it would be a good idea to check all the other connections to make sure they were solid. I did not want to have to do this again.
Also, we have balance problems. The volume difference between single coil pickups and a humbucker can be huge. So when the humbucker is selected, sometimes there is a huge jump in volume. This was certainly a problem for many 80s era HSS guitars. They used hot humbuckers to send that guitar signal through a rack of effects. And what I didn’t like about many of the HSS guitars back then was the huge volume jump when you put that humbucker on. Oh, I also didn’t like the bright pink, yellow and green colors in the 80s too, but that is another article.
The modern Telecaster is a lot different from the standard. They have 22 frets rather than 21 and at the headstock is present the truss rod adjustment rather than the body end. It has a six saddle bridge that allows the adjustment for length and height for individual string. It has a plain flat plate and the bridge cover has been discontinued for most models. The wiring of the modern Fender Telecaster is also different from the classic one, which is a 3-way toggle switch, which selects neck pickup in the first position, neck and bridge pickups together in the second position and in the third position is the bridge pickup. The volume control for all pickups is in the first knob and the second knob controls the tone for all pickups. The Fender Telecaster is made up of a solid body, which allows it to give a clean and crisp sound quality, which resulted in other leading companies to follow the trend.
Any content, trademark’s, or other material that might be found on the Pajama Music website that is not Pajama Music’s property remains the copyright of its respective owner/s. In no way does Pajama Music claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Pajama Music. All Rights Reserved.