Published at Saturday, September 01st, 2018 - 00:04:35 AM. . By Phoenix Girard.
Now that your bass is physically together lets string her up! Whatever your bass string of choice is, installing them properly will ensure good tension, a snug fit and long lasting strings. incorrect instillation will result in buzzes, dead spots and dollars wasted from broken strings. When you unwrap the strings they will be pre-coiled and ready to go. You will need a pair of wire cutters and a tuner. First take the G string and run the very tip through the bridge's G string slot, up past the saddle, under the string tree and past the tuning post.
Just like with any fretless instrument, you have to use your ears to judge the pitch and adjust accordingly. Avoid using the lines as a crutch to good intonation. Now if you have a blank plank, then your options are fewer (and less complicated) for intonating the bridge. Just grab a measuring tape and measure from the nut exactly 17 inches. Mark the spot with a piece of tape and intonate to that spot, which 9 times out of 10 is just about in the center of the octave double dot marker. Remember like the lined board, your ear is judge of pitch, not the markers.
Any content, trademark’s, or other material that might be found on the Pajama Music website that is not Pajama Music’s property remains the copyright of its respective owner/s. In no way does Pajama Music claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Pajama Music. All Rights Reserved.